- Model NO.: Dia3.3m*6.5m
- Material: Natural Rubber
- Length: 6.5m
- Steel Rope: 28mm
- Shackle: 32mm
- Specifacation: Dnvgl BV
- Color: Block or Others
- Transport Package: Bags, Container
- Origin: Shandong China
- Usage: Installed on The Shipboard for Berthing
- Diameter: 3.3m
- Sphere Weight: 2280kg
- Chain or Polyamide Fibre Rope: 30mm
- Buried Double-Ended Bolt: 60mm
- Factory: Since2003
- Trademark: Jinzheng
- Specification: Dia3.3m*L6.5m
- HS Code: 40169400
1. General introduction
ISO17357:2014 Floating pneumatic rubber fender is an anti-clossion device for marine application in the world. It is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the sea surface and work as a shock absorber when ship to ship transfer operation and ship to dock berthing and mooring operations.
Longao floating pneumatic rubber fenders fully company with all requirements on ISO17357:2014 Standard. Our products are certificated by DNVGL, LR and BV.
2. Construction features
The basic body construction of Floating pneumatic rubber fender consists of outer rubber layers, synthetic-tire-cord layers and inner layers.
3. For more products information, please visit our website: http://www.sgjzqn.cn.cn
4. If any need, feel free to contact me.
How to inflatable?
Clockwise unscrew the external PVC plugs
Clockwise rotation valve needle wrench, unscrew the vale core.
Let the gas valve clockwise tighten on the inflating valve The inflatable gun connected the inflatable seal,the other end of inflatable gun connected air compressor, hold the switch of inflatable gun for inflatable.
Inflation pressure is 0.05Mpa(advice 0.05Mpa), loosened the switch of inflatable gun when inflatable finish.
Discharge the gas fittings quickly,use the vale core wrench clockwise the vale core to the inflating valve,tighten until air tight.
Fit on the PVC plug and tighten and inflatable finished.